娛樂滿紛 26FUN - Powered by Discuz! Board

標題: 新手一問: 買個部定整機? [打印本頁]

作者: 123123_2005 時間: 2005-6-14 11:39 PM 標題: 新手一問: 買個部定整機?

部機壞鬼左.....諗緊整定買個部....

原本我部機係P4 1.7 GB, 512 MB RAM....但係懷疑底版打了柴.....唔知換底版+整要幾銀呢? 仲有有冇相熟鋪頭介紹?

OR 我諗住一了百了, 換埋部機.....budget大約五六千蚊度......心水呢兩部....

1. IBM -> http://www.pccwshop.com/onlinesh ... 945011&pg=&

2. HP -> http://h50025.www5.hp.com/hpcom/hc_hc/14_31_67_2960_PW663AA.html

唔知咁多位高手覺得我應該整定係買個部呢?

作者: Gretzky 時間: 2005-6-15 01:59 AM

Originally posted by 123123_2005 at 2005-6-14 11:39 PM:
部機壞鬼左.....諗緊整定買個部....
...

Buy another one....ibm has the best customer service.....

I am not a fan of HP...I still think Compaq's quality is low.....HP is better with printers.

don't waste your time fixing the old one....

作者: 死仔飽 時間: 2005-6-15 02:33 AM

你果部係廠機定係自己砌咖 @_@?

如果係自己砌既..就睇係依家部野夠唔夠用囉

如果夠用既...就買番塊板啦...唔洗咁貴呀嗎

最後講下換機喇....

你問下身邊有冇朋友識砌電腦....如果去黃金買料自己砌都唔洗6000 一.一"

作者: 123123_2005 時間: 2005-6-15 10:35 PM

thx.....

皆因部機係人地幫我砌, 我都唔知點去換塊底版......我又唔識番好d config.....所以係都係搵人整......

唔知整機又有邊間好介紹呢??

作者: vivienna 時間: 2005-6-15 11:46 PM

Originally posted by 123123_2005 at 2005-6-15 10:35 PM:
thx.....

皆因部機係人地幫我砌, 我都唔知點去換塊底版......我又唔識番好d config.....所以係都係搵人整......

唔知整機又有邊間好介紹呢??

Give it a try at ViewCom in ShamShuiPo, they have a service and wholesale department just across Golden. Pretty good service <---- that's what my dad said, but I have never been there. (ViewCom is a very big company). I usually do everything by myself, that includes diagnosing faults.

歡迎光臨娛樂滿紛 26FUN (http://26fun.com./bbs/)